Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs. Lockers are available on a first-come, first-served basis. To use a locker, enter a 4-digit personalized code for locking and unlocking. Directions for setting the 4-digit code are located inside each locker. Lockers unlock automatically after 24 hours.
Unassembled metal lockers typically ship within 24 to 48 hours and are a great option when lockers are needed on site quickly. We also offer professional, expert and timely assembly of lockers. Metal lockers are used for a variety of applications such as employee lockers, school lockers, student lockers, restaurant lockers, day care lockers, pool lockers, gym lockers, club lockers, fire department lockers, police lockers, apartment lockers and home lockers.
Towel Service is available to purchase throughout the year at a cost of $4/month or $16/Semester. Please see the Service Center to purchase Towel Service. The Service Center accepts cash (bills no larger than $20), Ram Cash, credit (visa/mastercard), and check (with valid driver's license). Towel Service can only be purchased through payroll deduction if purchased in conjunction with and for the same length as a locker or membership. This service allows you to check out up to three full size shower towels at one time.
Memberships are non-refundable, except for medical and health conditions, deployment, or extraneous circumstances. Money is refunded by the same method that payment was made (for instance, if you paid with a Visa card, your refund will be posted to the same Visa card). Please note: there is a six- to eight-week processing period for check refunds. Please contact [email protected] for further questions.
Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Storage Auctions in Alabama | Storage Auctions in Arizona | Storage Auctions in California | Storage Auctions in Florida | Storage Auctions in Colorado | Storage Auctions in Delaware | Storage Auctions in Florida | Storage Auctions in Georgia | Storage Auctions in Illinois | Storage Auctions in Kansas | Storage Auctions in Kentucky | Storage Auctions in Maryland | Storage Auctions in Massachusetts | Storage Auctions in Mississippi | Storage Auctions in Missouri | Storage Auctions in Nevada | Storage Auctions in New Hampshire | Storage Auctions in New Jersey | Storage Auctions in New Mexico | Storage Auctions in New York | Storage Auctions in North Carolina | Storage Auctions in Ohio | Storage Auctions in Oklahoma | Storage Auctions in Pennsylvania | Storage Auctions in South Carolina | Storage Auctions in Texas | Storage Auctions in Vermont| Storage Auctions in Virginia
3-Tier Locker compartments measure 19 in. high and 3-Tier Locker compartments measure 19 in. high and include two side hooks and number plates. Doors have top and bottom louvers for air ventilation. Recessed handle with finger-lift latch accommodates a standard padlock (not included). Welded steel construction with powder coat finish available in 17 colors. Overall size of locker ... More + Product Details Close