Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.
When it comes to adventurous living, Denver ranks as one of the most outdoorsy cities in the United States. Whether it’s hiking up mountains or skating down the winding mountain-roads in nearby Boulder, Denver is a great place to be outdoors and enjoy that adrenalin rush. So naturally, if you have a long stopover in Denver, or quite a bit of time on your hands before that big conference, you’ll need to find Denver luggage storage so you can make the best of it.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.

Buy Locker For Sale Denver


The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.

At Shelving Rack & Lockers, Inc. we are always doing our part to recycle good industrial storage equipment. We are continually looking for quality used products that are in usable and sturdy condition. Doing so allows us to give you great products as well as incredible savings. Additionally, it helps us do our part to keep unnecessary items out of our landfills, making our environment more green.
“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero.
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.
The RPD's Safety Deposit Room is packed with useful resources, but not all of them are accessible at first. To get everything in those pesky electronically sealed lockers, you'll need to get two replacement keypad keys. These can be found inside Pocket Safes scattered throughout the police station. To open a Pocket Safe, simply examine it and then input the correct button pattern. This require a little bit of trial and error to find out, but keep at it and you'll unlock it in no time. Below you can find details on where each Pocket Safe is located.
If you intend to give up your locker, please empty it and return your key to the equipment room manager on, or before, the expiration date. Any items left in expired lockers will be removed. Toiletries will be discarded. Clothing and valuables will be held for 30 days in the Business Office. To retrieve your valuables, you must pay a $10 locker fee to the Business Office.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.

At Shelving Rack & Lockers, Inc. we are always doing our part to recycle good industrial storage equipment. We are continually looking for quality used products that are in usable and sturdy condition. Doing so allows us to give you great products as well as incredible savings. Additionally, it helps us do our part to keep unnecessary items out of our landfills, making our environment more green.

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
The Operator (including employees, agents, and/or contractors of the Operator, the event and the venue) and/or law enforcement officials may inspect any and all items before they are stored in a locker or the facility and may, in their sole discretion, refuse to permit storage any items that may cause a risk and/or nuisance to the Operator, other users, the storage facility, the venue or the event.
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.
Roger, you officially need a life. He was / is our best CB, by a landslide. Again, you doing what you do for a living, you should know sir that #'s do not lie. As discussed before, you are not an athlete, and probably never have been. There is a confidence needed to be an athlete of any kind, where you are running, playing soccer or driving gay German race cars (American Muscle only please) around a race track (or Denver). Please show us quote as to where CHJ professed admiration for Joseph or Woods. Did CHJ make a pass at your girlfriend (not at you?) or something, as you sure do seem to have a hard on form him? Maybe??
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.

Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.

And once again, the reporter can't be bothered to check facts. Based on the master agreement signed in September 2017 by the union and the district, DPS teachers are actually in the midst of a 15% raise - 5% each year for 2017-18, 2018-19 and 2019-20. Now, those are averages, so some are getting more and some are getting less. But no raise in a decade? This reporter is a joke.
Unassembled metal lockers typically ship within 24 to 48 hours and are a great option when lockers are needed on site quickly. We also offer professional, expert and timely assembly of lockers. Metal lockers are used for a variety of applications such as employee lockers, school lockers, student lockers, restaurant lockers, day care lockers, pool lockers, gym lockers, club lockers, fire department lockers, police lockers, apartment lockers and home lockers.
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.

Whether you're playing as Leon or Claire, the solutions remain the same and can be accessed without grabbing the memo that hints at their solution. The only exception to this are the items you grab by developing film rolls--though, there is a minor exception even to that. Regardless, below you can find details on all the optional items locked behind safes, lockers, or hidden in the environment.


The Operator (including employees, agents, and/or contractors of the Operator, the event and the venue) and/or law enforcement officials may inspect any and all items before they are stored in a locker or the facility and may, in their sole discretion, refuse to permit storage any items that may cause a risk and/or nuisance to the Operator, other users, the storage facility, the venue or the event.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
The rental of the lockers and these Terms & Conditions are governed under and by the laws of the State of Washington. The parties consent and agree that the exclusive jurisdiction and venue for any dispute or claim relating to the rental and/or use of the lockers and/or locker facility, whether in contract, tort, or any other area of the law, shall be in Seattle, Washington.
×