There are two safes in the RPD--one in the West Office and the other in the Waiting Room. Both yield valuable resources well worth grabbing. We won't spoil what's inside each here (spoiler: they're all useful items), but we will reveal how to open them. The safe solutions are found in memos scattered around the building, which we've detailed the locations of for all of you completionists out there.
Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):

I agree with the suggestion about shipping your skis and boots, especially if you are not going to be using them after the Vail portion of your trip. Are you staying in LA for awhile or just making a connection there? If you are staying at a hotel in LA perhaps you could talk to them about having your equipment shipped there and stored as most hotels do have some sort of luggage storage facility. Hikers on the Appalachian Trail often ship supplies to US post offices that are in towns easily accessible to the trail so they don't have to carry everything with them. A lot will depend on your actual itinerary and whether you are stopping over in LA or just making a connection. You'll likely need to do some research and maybe think outside the box. I know it's always much nicer to ski on equipment you are used to but renting might end up being your best bet and the least hassle.
Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.

These things have been incredibly helpful; my daughter has used them for three years now and they keep working every year. I bought two as she has a tall locker, and these things certainly keep her organized. The paint hasn't flaked off the metal after this long, and nothing has come apart. Overall, this is the best locker shelf I've seen out there. Durable, long-lasting, and well worth the money!
There is a luggage storage service a short one minute walk from Union Station in downtown Denver - LUGDEN. You can make a reservation online - lugden.com, call - (303) 747-5600, or show up as a walk-in. They offer hourly, day, overnight and weekly bag storage. Great place to store your luggage if you're on a layover from Denver International Airport, or going to a concert, or headed to a Rockies game at Coors field and want to enjoy yourself without having to lug your bags around.
Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):
Teaming up with the Saint Francis Center, Denver is also planning on adding 200 more storage spaces at the organization’s employment service center, located near the city’s capital building. The contract between the city of Denver and the Saint Francis Center will start on June 1 and with $130,000 for the first year of storage space. After that, the center will be given $100,000 a year if the contract continues.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.

Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.


Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
The Operator (including employees, agents, and/or contractors of the Operator, the event and the venue) and/or law enforcement officials may inspect any and all items before they are stored in a locker or the facility and may, in their sole discretion, refuse to permit storage any items that may cause a risk and/or nuisance to the Operator, other users, the storage facility, the venue or the event.
AIS Industrial & Construction Supply’s locker division also handle heavy-duty metal lockers for the unique needs of Law Enforcement and Fire Protection professionals. A dual locker system provides a single tier locker with a vertical partition separating the bottom into two compartments. This works great for situations where work clothes and street clothes need to be kept separate.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
This film roll is interesting in that it doesn't point you to the location of resources; rather, it points you to an item you can use to gain some valuable stuff. Located in the Safety Deposit Room, grab the film roll by keying in the proper code to unlock the locker its sealed in. Though, you're by no means required to develop the film roll to get the items its photograph hints towards, but it does help direct you towards what you need to do
There are a bunch of items and resources in Resident Evil 2 that are completely optional, such as hip pouches that expand your inventory space or ammo for some of your most powerful guns. These are typically hidden inside safes or lockers with letter dial locks. You can find the combinations for these either in memos or even scribbled somewhere on a wall.
Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
With traditional package delivery, staff members typically spend a lot of time logging and organizing deliveries. These packages end up taking up valuable floor space and could remain there for a long time if a recipient forgets to pick it up or can't retrieve it during regular office hours. If packages are delivered to the recipient's door, there is the risk of the package being stolen or lost. Most residents would undoubtedly prefer a delivery system with tracking and security measures to keep their items visible at all times even if they're away from home. Lastly, it can be difficult to impossible to store perishable items that need to be refrigerated until the recipient can pick them up. But with meal kit and grocery delivery, this need is only going to increase.
THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSSES ARISING FROM THE LOSS OF OR INABILITY TO ACCESS ITEMS STORED WITHIN THE LOCKERS AND LOCKER FACILITY, INCLUDING BUT NOT LIMITED TO, MISSED AIRLINE FLIGHTS OR OTHER TRANSPORTATION OR LOSS OF BUSINESS AND SHALL NOT BE LIABLE FOR LOSS OF PROPERTY DUE TO CUSTOMER’S LOSS OF LOCKER KEYS OR COMBINATIONS.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
If you intend to give up your locker, please empty it and return your key to the equipment room manager on, or before, the expiration date. Any items left in expired lockers will be removed. Toiletries will be discarded. Clothing and valuables will be held for 30 days in the Business Office. To retrieve your valuables, you must pay a $10 locker fee to the Business Office.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.


Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
And once again, the reporter can't be bothered to check facts. Based on the master agreement signed in September 2017 by the union and the district, DPS teachers are actually in the midst of a 15% raise - 5% each year for 2017-18, 2018-19 and 2019-20. Now, those are averages, so some are getting more and some are getting less. But no raise in a decade? This reporter is a joke.

The Operator (including employees, agents, and/or contractors of the Operator, the event and the venue) and/or law enforcement officials may access lockers and the locker facility at any and all times and may examine any items, even if such items are in a sealed bag, backpack, suitcase or the like. Any items which may cause a risk and/or nuisance to the Operator, other users, the storage facility, the venue or the event may be removed and destroyed without notice to user and at the user’s expense. User waives any right of privacy to item stored in the lockers.


Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
There are plenty of convenient places to store your luggage in Denver, from downtown to Lincoln street to Capitol Hill and Commons park. The cost is just US$6 per day, and check in time is just 3 minutes. So basically, in the same time it took to make that instant cup of Ramen before rushing to the airport, you can be in and out the door with no luggage to weigh you down.
Our Promise Our staff is not only dedicated to providing you with cheap, second hand lockers, we are also dedicated to providing you with friendly customer service from the beginning of your buying process all the way to its delivery. We guarantee we have the best used lockers for sale and our projects speak to that. We have multiple satisfied clients whether we were installing athletic sport lockers for a high school or wooden cube lockers for ski lodges. We value building that trust with our clients to where they know we'll deliver quality products and installs.

There are two safes in the RPD--one in the West Office and the other in the Waiting Room. Both yield valuable resources well worth grabbing. We won't spoil what's inside each here (spoiler: they're all useful items), but we will reveal how to open them. The safe solutions are found in memos scattered around the building, which we've detailed the locations of for all of you completionists out there.
×