Dimensions (Note that, in English-speaking countries, even those commonly using metric measurements now, locker dimensions are usually clean numbers of inches or feet, while the corresponding metric measurements are uneven, involving decimal places when precision is required, presumably resulting from continued use of locker designs based on feet and inches, unchanged for decades other than for cosmetic features.):
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:
Teaming up with the Saint Francis Center, Denver is also planning on adding 200 more storage spaces at the organization’s employment service center, located near the city’s capital building. The contract between the city of Denver and the Saint Francis Center will start on June 1 and with $130,000 for the first year of storage space. After that, the center will be given $100,000 a year if the contract continues.
Salsbury Industries carries a complete line of metal lockers that are designed for heavy duty use and storage. Metal lockers are constructed of 16 gauge steel and are available in single tier, double tier, triple tier, six tier box style, box style bridge, extra wide single tier, extra wide double tier and extra wide triple tier lockers. Metal lockers are available as Standard Metal Lockers, Extra Wide Standard Metal Lockers, Vented Metal Lockers, Extra Wide Vented Metal Lockers and in a variety of additional products.
Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs. Lockers are available on a first-come, first-served basis. To use a locker, enter a 4-digit personalized code for locking and unlocking. Directions for setting the 4-digit code are located inside each locker. Lockers unlock automatically after 24 hours.
There are two safes in the RPD--one in the West Office and the other in the Waiting Room. Both yield valuable resources well worth grabbing. We won't spoil what's inside each here (spoiler: they're all useful items), but we will reveal how to open them. The safe solutions are found in memos scattered around the building, which we've detailed the locations of for all of you completionists out there.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
Officeworks School List Service is backed by our Parents Price Promise - ‘Find an identical stocked item on a quoted school list at a lower price and we’ll beat it by 20%’. For 2019 school lists, the Parents Price Promise is only applicable on prices that appear on valid 2018 school book lists for the quantity listed. Valid on identical stocked or Officeworks-deemed equivalent items where identical products are not available. Excludes competitor out of stocks, categories or items not ranged and items available only for customer order at Officeworks. Offer available from 01/09/18 to 11/02/19. Cannot be used in conjunction with Officeworks’ 5% Price Guarantee.