Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.
Teaming up with the Saint Francis Center, Denver is also planning on adding 200 more storage spaces at the organization’s employment service center, located near the city’s capital building. The contract between the city of Denver and the Saint Francis Center will start on June 1 and with $130,000 for the first year of storage space. After that, the center will be given $100,000 a year if the contract continues.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.
3-Tier Locker compartments measure 19 in. high and 3-Tier Locker compartments measure 19 in. high and include two side hooks and number plates. Doors have top and bottom louvers for air ventilation. Recessed handle with finger-lift latch accommodates a standard padlock (not included). Welded steel construction with powder coat finish available in 17 colors. Overall size of locker ... More + Product Details Close
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
Southwest Solutions Group® provides design and installation services for computerized grocery pickup refrigerated and freezer lockers for residential applications, restaurants, student housing, universities, and more in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, and Pueblo. We will also provide you with a free consultation to determine your exact needs and specifications before the design process begins. To learn more or to speak with a specialist, call us at (303) 741-1600 or send us a message today.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.