They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.
Instead of delivering a package to your home or business address, you can select an Amazon Locker location and pick up your package at a time that's convenient for you. Once your package is delivered to the Amazon Locker, you'll receive an e-mail notification with a unique pickup code that includes the address and opening times for your selected Locker location.

Examine the scepter to obtain the Red Jewel. This goes into the Bejeweled Box, which you can get in the Interrogation Room. Accessing this area requires the Club Key, so if you don't have that yet, keep progressing the story until you get it. Once you've got the Bejeweled Box, combine it with the Red Jewel to get the S.T.A.R.S. badge. You can use this item in two locations: the Underground Stairs in the Middle section of the Underground Facility, and the S.T.A.R.S. Office.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Accessing and using the lockers and facilities provided is your consent and acceptance of ALL of the terms and conditions concerning the facilities, lockers and supplied lock and combination. The terms and condition include those set forth below and all rules, hours of use and other terms and conditions posted at the facility or in conjunction with the event.
Examine the scepter to obtain the Red Jewel. This goes into the Bejeweled Box, which you can get in the Interrogation Room. Accessing this area requires the Club Key, so if you don't have that yet, keep progressing the story until you get it. Once you've got the Bejeweled Box, combine it with the Red Jewel to get the S.T.A.R.S. badge. You can use this item in two locations: the Underground Stairs in the Middle section of the Underground Facility, and the S.T.A.R.S. Office.
“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero. 

Looking for a Lockers, Shelving, Racks business in Denver? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been running their business since 1941.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Salsbury Industries carries a complete line of metal lockers that are designed for heavy duty use and storage. Metal lockers are constructed of 16 gauge steel and are available in single tier, double tier, triple tier, six tier box style, box style bridge, extra wide single tier, extra wide double tier and extra wide triple tier lockers. Metal lockers are available as Standard Metal Lockers, Extra Wide Standard Metal Lockers, Vented Metal Lockers, Extra Wide Vented Metal Lockers and in a variety of additional products. 

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
The visually appealing and very durable Traditional Collection is our most widely distributed locker line. Offering the most value for typical locker applications, this collection is available in a full range of spacious sizes, from single- to six-tier configurations, as well as two-person, 16-person and wall-mounted. The addition of our new 2 person Z-Locker completes the Traditional collection.
3-Tier Locker compartments measure 19 in. high and 3-Tier Locker compartments measure 19 in. high and include two side hooks and number plates. Doors have top and bottom louvers for air ventilation. Recessed handle with finger-lift latch accommodates a standard padlock (not included). Welded steel construction with powder coat finish available in 17 colors. Overall size of locker ...  More + Product Details Close

Public lockers are available on all floors of the Anderson Academic Commons for short-term storage needs.  Lockers are available on a first-come, first-served basis.  To use a locker, enter a 4-digit personalized code for locking and unlocking.  Directions for setting the 4-digit code are located inside each locker.  Lockers unlock automatically after 24 hours.
When it comes to adventurous living, Denver ranks as one of the most outdoorsy cities in the United States. Whether it’s hiking up mountains or skating down the winding mountain-roads in nearby Boulder, Denver is a great place to be outdoors and enjoy that adrenalin rush. So naturally, if you have a long stopover in Denver, or quite a bit of time on your hands before that big conference, you’ll need to find Denver luggage storage so you can make the best of it.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
I agree with the suggestion about shipping your skis and boots, especially if you are not going to be using them after the Vail portion of your trip. Are you staying in LA for awhile or just making a connection there? If you are staying at a hotel in LA perhaps you could talk to them about having your equipment shipped there and stored as most hotels do have some sort of luggage storage facility. Hikers on the Appalachian Trail often ship supplies to US post offices that are in towns easily accessible to the trail so they don't have to carry everything with them. A lot will depend on your actual itinerary and whether you are stopping over in LA or just making a connection. You'll likely need to do some research and maybe think outside the box. I know it's always much nicer to ski on equipment you are used to but renting might end up being your best bet and the least hassle.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.
Don't count on finding this kind of thing. Some silly people put bombs in there. Our Homeland Security people try to head those things off. In Europe, especially GB, you can't even find a trash can on the sidewalks for the same reason. A worker at the train station told us to just throw it on the floor, the people in the green jackets will pick it up. Really. What a world we live in.
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.

The rental of the lockers and these Terms & Conditions are governed under and by the laws of the State of Washington. The parties consent and agree that the exclusive jurisdiction and venue for any dispute or claim relating to the rental and/or use of the lockers and/or locker facility, whether in contract, tort, or any other area of the law, shall be in Seattle, Washington. 
×