2-Tier Locker compartments measure 30 in. high and 2-Tier Locker compartments measure 30 in. high and includes two side hooks and number plates. Doors have top and bottom louvers for air ventilation. Recessed handle with finger-lift latch accommodates a standard padlock (not included). Welded steel construction with powder coat finish available in 17 colors. Overall size of locker ...  More + Product Details Close
Memberships are non-refundable, except for medical and health conditions, deployment, or extraneous circumstances. Money is refunded by the same method that payment was made (for instance, if you paid with a Visa card, your refund will be posted to the same Visa card). Please note: there is a six- to eight-week processing period for check refunds. Please contact [email protected] for further questions.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications and has matching finish on all sides and top for a finished look. Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel brackets and fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria.
Terry, there are many storage unit places closer to the airport, but then of course you'd have to rent a car. DIA Self Storage, for example, is less than 10 miles away. You can google map Denver International Airport, then "search nearby" for "self storage units" if you think that's something you might want to do. http://www.coloradoselfstorage.com/

And once again, the reporter can't be bothered to check facts. Based on the master agreement signed in September 2017 by the union and the district, DPS teachers are actually in the midst of a 15% raise - 5% each year for 2017-18, 2018-19 and 2019-20. Now, those are averages, so some are getting more and some are getting less. But no raise in a decade? This reporter is a joke.
AIS Industrial & Construction Supply’s locker division also handle heavy-duty metal lockers for the unique needs of Law Enforcement and Fire Protection professionals. A dual locker system provides a single tier locker with a vertical partition separating the bottom into two compartments. This works great for situations where work clothes and street clothes need to be kept separate.
If you want lockers, welcome to the place that knows lockers! You will find we are a trusted, family-owned business that has become the largest vendor of lockers in North America and beyond. Here you can find all locker sizes, shapes and colors for schools, businesses and even for homes. Our guests tell us that they came to SchoolLockers.com because we have helped their friends and business associates choose the best lockers for their needs. When you take that wealth of experience plus our convenient and secure online shopping and combine those with the lowest shipping prices possible, you see why we are the locker authority. Give our friendly and knowledgeable staff a call, because we are always available and just a phone call away.
Our Promise Our staff is not only dedicated to providing you with cheap, second hand lockers, we are also dedicated to providing you with friendly customer service from the beginning of your buying process all the way to its delivery. We guarantee we have the best used lockers for sale and our projects speak to that. We have multiple satisfied clients whether we were installing athletic sport lockers for a high school or wooden cube lockers for ski lodges. We value building that trust with our clients to where they know we'll deliver quality products and installs.
Budget Conscious Used lockers are a great way for you to pay for lockers at a cheap price without having to sacrifice quality. You also don't have to sacrifice variety which is why we offer everything from antique lockers to sports lockers. Tall or small, we ensure that all used lockers are priced fairly so that you get the best sale possible. Not only do we provide the best used lockers, we also offer storage cabinets.
I agree with the suggestion about shipping your skis and boots, especially if you are not going to be using them after the Vail portion of your trip. Are you staying in LA for awhile or just making a connection there? If you are staying at a hotel in LA perhaps you could talk to them about having your equipment shipped there and stored as most hotels do have some sort of luggage storage facility. Hikers on the Appalachian Trail often ship supplies to US post offices that are in towns easily accessible to the trail so they don't have to carry everything with them. A lot will depend on your actual itinerary and whether you are stopping over in LA or just making a connection. You'll likely need to do some research and maybe think outside the box. I know it's always much nicer to ski on equipment you are used to but renting might end up being your best bet and the least hassle.
Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
“Fans visiting Sports Authority Field at Mile High should keep in mind that not bringing bags to the stadium will ensure the quickest, easiest entrance and exit to stadium events,” General Manager Jay Roberts said in a statement. “However, we understand there are situations where our fans have to carry personal items or check bags. Based on fan feedback, we are implementing a new locker rental program which will minimize wait times to retrieve checked items.”
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.

Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
2-Tier Locker compartments measure 30 in. high and 2-Tier Locker compartments measure 30 in. high and includes two side hooks and number plates. Doors have top and bottom louvers for air ventilation. Recessed handle with finger-lift latch accommodates a standard padlock (not included). Welded steel construction with powder coat finish available in 17 colors. Overall size of locker ...  More + Product Details Close

Grocery and meal delivery kits are one of the hottest new services on the market; if you work in an apartment or other residential facilities, then you might have noticed an increase in these types of deliveries. Since many of these deliveries include perishable items, they can be an even bigger headache than regular packages especially if you're still using manual systems. Many of these applications have found a solution in computerized grocery pickup refrigerated and freezer lockers in apartments, universities, and student housing in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Pueblo, and throughout the state of Colorado. See below to learn more. Click here to watch a video showing how the computerized pickup lockers work.
“Fans visiting Sports Authority Field at Mile High should keep in mind that not bringing bags to the stadium will ensure the quickest, easiest entrance and exit to stadium events,” General Manager Jay Roberts said in a statement. “However, we understand there are situations where our fans have to carry personal items or check bags. Based on fan feedback, we are implementing a new locker rental program which will minimize wait times to retrieve checked items.”
Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.

Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
They are usually intended for use in public places, and intended for the short- or long-term private use of individuals for storing clothing or other personal items. Users may rent a locker for a single use or for a period of time for repeated use. Some lockers are offered as a free service to people partaking of certain activities that require the safekeeping of personal items.
Phenolic Lockers are the material of choice when a high degree of design flexibility is desired or where durability and strength are required. These lockers are fabricated to stand the test of time. The dense components, combined with stainless steel fasteners, stand up to the most extreme conditions of moisture and humidity. Phenolic is impact, water and corrosion resistant, and does not support bacteria. The superior construction and materials used in the locker system make it adaptable to all types of facilities, including health clubs, country clubs and executive washrooms. Phenolic lockers can easily be customized. Please consult with ASI Storage for customization or options not shown in the catalog. Any customization is subject to a change in price and delivery lead times. Now available in color-thru phenolic colors upon request.
If you want lockers, welcome to the place that knows lockers! You will find we are a trusted, family-owned business that has become the largest vendor of lockers in North America and beyond. Here you can find all locker sizes, shapes and colors for schools, businesses and even for homes. Our guests tell us that they came to SchoolLockers.com because we have helped their friends and business associates choose the best lockers for their needs. When you take that wealth of experience plus our convenient and secure online shopping and combine those with the lowest shipping prices possible, you see why we are the locker authority. Give our friendly and knowledgeable staff a call, because we are always available and just a phone call away.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.

Don't count on finding this kind of thing. Some silly people put bombs in there. Our Homeland Security people try to head those things off. In Europe, especially GB, you can't even find a trash can on the sidewalks for the same reason. A worker at the train station told us to just throw it on the floor, the people in the green jackets will pick it up. Really. What a world we live in.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.
The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.
Members who pay via monthly deductions must fulfill two months of membership before being eligible to cancel their locker and gym membership.  Recreational Sports requires submission of a completed cancellation form 30 days prior to the first of the month that you would like your locker and gym membership terminated. You can cancel by filling out a Cancellation Form on the Recreational Sports website (see link below). 4-month and 12-month memberships may not be cancelled after purchase.

Officeworks School List Service is backed by our Parents Price Promise - ‘Find an identical stocked item on a quoted school list at a lower price and we’ll beat it by 20%’. For 2019 school lists, the Parents Price Promise is only applicable on prices that appear on valid 2018 school book lists for the quantity listed. Valid on identical stocked or Officeworks-deemed equivalent items where identical products are not available. Excludes competitor out of stocks, categories or items not ranged and items available only for customer order at Officeworks. Offer available from 01/09/18 to 11/02/19. Cannot be used in conjunction with Officeworks’ 5% Price Guarantee.
Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.

Buy Denver Lockers For Sale

×