Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero.
The Operator (including employees, agents, and/or contractors of the Operator, the event and the venue) and/or law enforcement officials may inspect any and all items before they are stored in a locker or the facility and may, in their sole discretion, refuse to permit storage any items that may cause a risk and/or nuisance to the Operator, other users, the storage facility, the venue or the event.
Unassembled metal lockers typically ship within 24 to 48 hours and are a great option when lockers are needed on site quickly. We also offer professional, expert and timely assembly of lockers. Metal lockers are used for a variety of applications such as employee lockers, school lockers, student lockers, restaurant lockers, day care lockers, pool lockers, gym lockers, club lockers, fire department lockers, police lockers, apartment lockers and home lockers.
Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes. However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
There is a luggage storage service a short one minute walk from Union Station in downtown Denver - LUGDEN. You can make a reservation online - lugden.com, call - (303) 747-5600, or show up as a walk-in. They offer hourly, day, overnight and weekly bag storage. Great place to store your luggage if you're on a layover from Denver International Airport, or going to a concert, or headed to a Rockies game at Coors field and want to enjoy yourself without having to lug your bags around.
There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
If you intend to give up your locker, please empty it and return your key to the equipment room manager on, or before, the expiration date. Any items left in expired lockers will be removed. Toiletries will be discarded. Clothing and valuables will be held for 30 days in the Business Office. To retrieve your valuables, you must pay a $10 locker fee to the Business Office.
Stored my luggage for several hours at Lugden. Great location just across the street from Union Station. Spoke with the owner and he said he owns the parking spot so they are always there during the day. Prices were reasonable and I felt comfortable storing my bags there while I explored Denver. The owner was nice and gave me coupons for some local businesses.
The storage lockers were a “pilot,” the kind of small test that city government frequently uses to test a new or controversial idea. The city offered up the lockers for individuals to use for months-long stretches. At the time, city officials warned that “misuse of the lockers, vandalism, or other unanticipated results,” could force them to cancel the project.