Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.

Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.

Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.

Rebecca, I remember a previous post that a visitor found storage at the bus station, so I called to see if still available, and it is. Lockers are $3 for the first hour and $1 per hour after that. It's difficult to find storage short term because of security/liability, esp. since 9/11. If you are staying at a hotel, they will often keep your luggage for you short term.
Unlike our competitors, we make it a point to refurbish all of our used lockers so that we can deliver a quality product for the cheaper price you want. With warehouses on the East and West coasts, we're able to store several lockers so that we can bring you the best selection possible. Find the shape, color, and size that works best for you with just a few clicks. Our site is simple to navigate, easing the process of buying so that you can spend more time on the things that matter to you. Need help? We're just a call or an email away and we're always happy to assist you at any stage of your buying process.
Memberships are non-refundable, except for medical and health conditions, deployment, or extraneous circumstances. Money is refunded by the same method that payment was made (for instance, if you paid with a Visa card, your refund will be posted to the same Visa card). Please note: there is a six- to eight-week processing period for check refunds. Please contact [email protected] for further questions. 

Your industrial-style loft melds hardwood floors, exposed duct work, and stainless steel appliances beautifully, but the struggle is creating a cohesive design with your decor. Mix new and old, cold metal and warm woods to fit this style, and start with a signature piece, such as used school lockers. These lockers are industrial in nature, and whether the metal is flawlessly finished in a bright color or boasts naturally-occurring rust from years of neglect, they fit in with this design style. Used school lockers also offer a functional storage space in various sizes, with lockers as small as 12 inches by 12 inches, and as large as 30 inches by 66 inches. Once you decide on your lockers, keep your storage solution as functional as possible with a school locker organizer to make the most of the space with hanging shelves or small magnetic holders. School locker magnets can be that extra little space you need to hold pens, business cards, reminder lists, and other small items. Finding the right design pieces for your industrial-style loft can be somewhat difficult, but the sellers on eBay have you covered with a large selection of vintage items like school lockers.
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations.
Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.
Memberships are non-refundable, except for medical and health conditions, deployment, or extraneous circumstances. Money is refunded by the same method that payment was made (for instance, if you paid with a Visa card, your refund will be posted to the same Visa card). Please note: there is a six- to eight-week processing period for check refunds. Please contact [email protected] for further questions.
LOCKERS ARE USED AT RENTER’S OWN RISK. THE OPERATOR (INCLUDING EMPLOYEES, AGENTS, AND/OR CONTRACTORS OF THE OPERATOR, THE EVENT AND THE VENUE) DISCLAIMS ANY AND ALL LIABILITY FOR ANY ITEMS STORED WITHIN THE LOCKERS OR THE LOCKER FACILITY, INCLUDING LOSSES RESULTING FROM LOCK FAILURE, RIOTS, VANDALISM, WEATHER, LOCKER ACCESSED BY OTHERS, COMBINATION ACCESSED BY OTHERS, THEFT, OR FAILURE TO COLLECT THE ARTICLES AFTER USE.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system. 

Buy Locker For Sale Denver

×