There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.

Buy Denver Lockers


The rental of the lockers and these Terms & Conditions are governed under and by the laws of the State of Washington. The parties consent and agree that the exclusive jurisdiction and venue for any dispute or claim relating to the rental and/or use of the lockers and/or locker facility, whether in contract, tort, or any other area of the law, shall be in Seattle, Washington.

With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.


Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
AIS Industrial & Construction Supply’s locker division also handle heavy-duty metal lockers for the unique needs of Law Enforcement and Fire Protection professionals. A dual locker system provides a single tier locker with a vertical partition separating the bottom into two compartments. This works great for situations where work clothes and street clothes need to be kept separate.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Material: steel is the traditional material; but wood, plastic, or laminate are sometimes used. Plastic or laminate lockers are sometimes advocated in environments, such as near swimming pools, where moisture accumulation may cause steel lockers to rust over time. They can also be used in external applications where internal space is not available.

The badge serves as a key to unlock the white holding case holding the gun parts for either Leon's Magnum or Claire's Sub-machine Gun in the Underground Stairs. These are good to grab, as you'll be following up to use the badge in the S.T.A.R.S. Office to get the weapons themselves. But before you combine the badge with the computer tower, examine the badge's backing to reveal a hidden USB. This can then be used to open the armory.
There are a bunch of items and resources in Resident Evil 2 that are completely optional, such as hip pouches that expand your inventory space or ammo for some of your most powerful guns. These are typically hidden inside safes or lockers with letter dial locks. You can find the combinations for these either in memos or even scribbled somewhere on a wall.
And once again, the reporter can't be bothered to check facts. Based on the master agreement signed in September 2017 by the union and the district, DPS teachers are actually in the midst of a 15% raise - 5% each year for 2017-18, 2018-19 and 2019-20. Now, those are averages, so some are getting more and some are getting less. But no raise in a decade? This reporter is a joke.
“In many cases, they’re [homeless] building things like little shanty towns, bringing furniture in and camping out. There have been incidents at night where there have been brawls or loud arguments happening at 3, 4 a.m. waking people up. I do know that several neighbors have complained that they have found human waste in their yards,” said Romero.

The rental of the lockers and these Terms & Conditions are governed under and by the laws of the State of Washington. The parties consent and agree that the exclusive jurisdiction and venue for any dispute or claim relating to the rental and/or use of the lockers and/or locker facility, whether in contract, tort, or any other area of the law, shall be in Seattle, Washington.
AIS Industrial & Construction Supply’s locker division also handle heavy-duty metal lockers for the unique needs of Law Enforcement and Fire Protection professionals. A dual locker system provides a single tier locker with a vertical partition separating the bottom into two compartments. This works great for situations where work clothes and street clothes need to be kept separate.
Looking for a Lockers, Shelving, Racks business in Denver? AIS Industrial and Construction Supply (Shelving Division) provides Sales, Assembly, Delivery, and Installation of Lockers, Shelving, Racks and Cabinets to Warehouse Storage Solutions – Business Storage Solutions in Arvada, Aurora, Broomfield, Commerce City, Dupont, Eastlake, Englewood, Golden, Henderson, Idledale, Littleton, Westminster, and Wheat Ridge. AIS Industrial and Construction Supply (Shelving Division) have been running their business since 1941.
×